FCX2000-UM-251-9370 i
HISTORY OF REVISIONS
No. Date issued Description of revision Page Edition
1 16.11.22 First Printing All 01
2 16.12.05 The packing style was changed. 2-2 02
3 17.01.10 Effective cutting area for the FCX2000-180 was corrected. 1-1,1-3 03
4 17.02.09 Drawing is added for parts of hangers. 11-15 03
5 17.02 .13 Note was added for the X flexible cable damage. 2-8 03
6 17.02 .13 Confirming the Conditions of X flexible cable was added. Section 2.5 03
7 17.10.17 The part number for Slider Fix Plate was added. 11- 8 04
8 17.10.17 The part name for U622623151 was corrected. 11- 8 04
9 17.10.19 The Y bar height adjustment procedure was added. 8-64 to 65 04
10 18.01.17 The procedure added to install the X flexible cable. 8-26 04
11 18.01.17 The part name for X flexible cables were corrected. 6 -1, 11- 8, 11-13 04
12 18.01.17 The Note is added for the linear bearing of RMS. 8-38 04
13 18.04.12 The part name for Pen Block Assembly was corrected. 6-1,11-10 05
14 18.0 4.12 The Pen Block Height Adjustment Plate was added. 11-16 05
15 18.05.22
Procedure was corrected to replace the Electrostatic Adhesion Panel.
8-63 to 8-67 06
16 18.05.22
The parts number for the Electrostatic Adhesion Panel was corrected.
11-12 06
17 18.05.30 The parts number for the Stopper,Pen was corrected. 11-10 06
18 18.09.20 Installation procedure of optional warning light was added. Section 2.7 07
19 18.09.20 The parts numbers are added for the warning light. 11-1,11-3,11-16 07
20 18.09.20 The Y bar right angle adjustment procedure was added. Section 8.10 08
21 19.04.26 Typing miss was corrected. 9-14,9-15 09
22 20.06.29
The parts number for the Nylon washer, NNS-0410-10 was added.
11-10,11-11 09
23 21.09.17 The part number for Adjuster, TM-73-2 was corrected. 11-10 10
To Next Page
Loading...
