FCX2000-UM-251-9730 4-18
4.
OPER ATIONS
Operation Method: Operation with the [ENTER] key
(1) Press the [ENTER] key from READY status.
CONDITION No. selection screen is displayed.
(2) Select the CUT CONDITION (Tool Condition) by pressing one of [1] to [4] key or using the POSITION
(▲▼▲▼) keys while holding down the [ENTER] key. (The selected item is highlighted.)
(3) Conrm the setting and release the [ENTER] key.
It will return to default screen.
To Next Page
Loading...
