GRAPHTEC FCX4000 - The X Or Y Motor Was Replaced; The X Or Y Belt Was Replaced

FCX4000-UM-251-9370 8-5
8 ELECTRICAL ADJUSTMENTS
8.2.7 The X or Y motor was replaced
When the X or Y motor was exchanged, an electric adjustment is executed by the following procedure.
End of Adjustment
8.11 Adjusting the Distance and the Perpendicularity Accuracy
8.2.8 The X or Y belt was replaced
When the X or Y belt was exchanged, an electric adjustment is executed by the following procedure.
8.9 Adjusting the Home Position
End of Adjustment
8.11 Adjusting the Distance and the Perpendicularity Accuracy