GRAPHTEC FCX4000 - Motor Belt

FCX4000-UM-251-9370 7-17
7 DISASSEMBLY AND ASSEMBLY
7.2.2 X Motor Belt
How to detach the X Motor Belt
(1) Detach the right rear corner cover (Refer to the section 7.1.2.).
(2) Detach the left rear corner cover (Refer to the section 7.1.4.).
(3) Detach the right top cover (Refer to the section 7.1.5.).
(4) Detach the left top cover (Refer to the section 7.1.6.).
(5) Detach the rear top cover (Refer to the section 7.1.10.).
(6) Detach the X exible cable cover (Refer to the section 7.1.11.).
(7) Detach the rear bottom cover (Refer to the section 7.1.12.).
(8) Mark the position of rear X belt tension bracket before loosing the screws of the rear X belt tension
bracket as shown in the picture below.
Rear X belt tension bracket
Mark the position of rear
X belt tension bracket.
Rear X belt tension bracket
Mark the position of X
rear belt tension bracket.
(9) Loosen the two M4L6 binding head screws xing from the bottom of rear X rear belt tension bracket.
Access the screws from these holes.