GRAPHTEC FCX4000 - Cutter Plunger

To Next Page

To Previous Page

FCX4000-UM-251-9370 2-2

2 Description of Parts

2.2 Cutter Plunger

This chapter describes the structures and types of the cutter plungers (cutter pens).

Cutter Plunger Nomenclature

There is two different plungers to suit the diameter of the cutter blade to be mounted (the φ1.5 mm cutter

plunger is provided as a standard accessory (PHP33-CB15N-HS)).

Cutter blade Plunger

Plunger-cap Blade-length adjustment knob

(Blue: For φ0.9 mm-diameter blades)

(Red: For φ1.5 mm-diameter blades)

PHP35-CB09-HS/PHP35-CB15-HSPHP33-CB09N- HS/PHP33-CB15N-HS

Cutter blade Plunger

Blade-length adjustment knobPlunger-cap

(Blue: For φ0.9 mm-diameter blades)

(Red: For φ1.5 mm-diameter blades)

Structure of Cutter Plunger

PHP35-CB09-HS/

PHP35-CB15-HS

Cutter blade

φ0.9 mm / φ1.5 mm

Plunger

Chuck

Blade-length adjustment knob

(Blue) / (Red)

Plunger-cap

Hole

PHP33-CB09N-HS/

PHP33-CB15N-HS