FCX4000-UM-251-9730 6-1
6 LIST OF TOOLS
6 LIST OF TOOLS
6.1 Tools
No. Tool Adjustment Item
1 Correx gauge (Dial tension gauge) 500 gf Pen force adjustment
2 Correx gauge (Dial tension gauge) 300 gf Pen force and belt tension adjustment
3 Correx gauge (Dial tension gauge) 50 gf Pen force adjustment
4 Cutter plunger Pen force adjustment
5 Cutter blade Pen force adjustment
6 Fiber tip pen Distance adjustment
7 Push-pull gauge 5 kg Belt tension adjustment
8 Push-pull gauge 2 kg Belt tension adjustment
9 Push-pull gauge 1 kg Belt tension adjustment
10 Scale (300 mm) Distance adjustment
11 Windows PC Firmware update
12 USB I/F cable Firmware update
13 Phillips screwdriver #1
M2,M2.6
14 Phillips screwdriver #2
M3,M4,M5
15 Phillips screwdriver #3
M6,M8
16 Flat-head screwdriver #1
17 Flat-head screwdriver #2
18 Hexagon wrench 0.89 mm span For M2 set-screws
19 Hexagon wrench 1.5 mm span For M3 set-screws
20 Hexagon wrench 2.0 mm span For M4 set-screws
21 Hexagon wrench 2.5 mm span For M3 socket-screw
22 Hexagon wrench 3.0 mm span For M4 socket-screw
23 Hexagon wrench 3.5 mm span For M5 socket-screw
24 Box wrench 5.5 mm span For removing M3 nuts
25 Double-sided tape (10 mm wide) For securing the FPC cables
26 Ethyl alcohol For cleaning the electrostatic adhesion plate and rail
27
Silicon grease (Shinetsu Silicon grease G-501)
Belt
28 Albania Grease AS2 (Showa Shell) Gear, Shaft Bearing
To Next Page
Loading...