FCX4000-UM-251-9730 3-15
3.
OPERATIONS
3.6 About the Initial Setup Screen
The Initial Setup Screen appears only when powering up the machine for the rst time after purchase. Here,
you can set the display language and length unit.
You can also enter the menu select from the READY status after a setup.
Operation
(1) Once the machine is powered on (" | " side) a message will be displayed after the version is displayed.
(2) Use the POSITION (▲▼▲▼) keys to select the language.
(This manual assumes you chose the English language setting.)
(3) Press the [ENTER] key.
After the DISPLAY LANGUAGE is selected, the LENGTH UNIT screen will appear.
(4) Press the [1] key (METRIC) or the [2] key (INCH) to select the length unit setting.
(5) Conrm the setting and press the [ENTER] key (SET).
(6) Setting will be set, and it will return to default screen.
To Next Page
Loading...