GRAPHTEC FCX4000 - Flexible Cable

FCX4000-UM-251-9370 7-27
7 DISASSEMBLY AND ASSEMBLY
7.2.6 X Flexible Cable
How to detach the X Flexible Cable
(1) Detach the left top cover (Refer to the section 7.1.6.)
(2) Detach the rear top cover (Refer to the section 7.1.10.).
(3) Detach the rear Y bar end cover (Refer to the section 7.1.16.).
(4) Remove the two M4L6 binding head screws holding the rear Y bar lower plate.
M4L6 binding head screw
Rear Y bar lower plate
(5) Detach the rear Y bar lower plate from Y bar.
(6) Remove the three M3L3 binding head screws holding the X Flexible Cable Bracket, and then detach it.
M3L3 binding head screw
X exible cable bracket