GRAPHTEC FCX4000 - Page 122

FCX4000-UM-251-9370 8-11
8 ELECTRICAL ADJUSTMENTS
(8) Turn on the power for the FCX4000.
Note:
The NV-Flash ROM error will be displayed when the model of no NV-RAM Clear and the normal mode of
model is not matching.
Perform the NV-RAM Clear correctly if the NV-Flash ROM error was displayed.
The model of NV-RAM Clear and the model of normal setting must to be same.
(9) TheLanguageselectionmenuandtheLengthUnitselectionmenuaredisplayedattherstpoweron
(Refer to the section 8.7.).
(10) Select the Language and the Length Unit.
(11) Turn off the power for the FCX4000.