FCX4000-UM-251-9370 7-24
7 DISASSEMBLY AND ASSEMBLY
(9) Loosen the two M4L6 binding head screws xing from the bottom of X rear belt tension bracket.
Access the screws from these holes.
(10) Loosen the two M4L20 binding head screws adjusting the X rear belt tension.
X rear belt tension adjustment screws
Rear left side
(11) Move the Y bar to the access holes of screws.
Remove the four M3L10 binding head screws holding the belt stoppers, and then detach the rear X belt
from the rear X slider and the pulleys.
M3L10 binding head screw
Rear X belt
Access the screws from these holes.
To Next Page
Loading...