Quick Start Guides
The Quick Start Guide is a printed document, shipped in the product packaging with K2 Summit/Solo
systems and K2 Dyno Replay Controllers. The Quick Start Guide provides step-by-step installation
instructions for basic installation and operation of the product.
K2 Storage Cabling Guide
The K2 Storage Cabling Guide is a printed document, shipped in the product packaging with the
primary RAID storage chassis. The cabling guide provides instructions for K2 Storage Area Network
(SAN) cabling and external configuration. The cabling guide provides instructions for each level
of K2 SAN and covers both redundant and basic (non-redundant) systems. It also provides instructions
for connecting direct-connect external RAID storage to K2 Summit systems.
K2 Documentation Set
Except for the release notes, the full set of support documentation, including this manual, is available
in the K2 or K2/STRATUS Documentation Set. You can find the Documentation Set on the Grass
Valley website. The following URL allows you to browse by K2 software version:
http://www.grassvalley.com/dl/k2_summit
You can also find the Documentation Set on the USB Recovery Flash drive that ships with your K2
Summit/Solo system.
The Documentation Set includes the following K2 product documents:
Provides instructions for configuring and operating the media channels
of product.
K2 AppCenter User
Manual
The Quick Start Guide provides step-by-step installation instructions
for basic installation and operation of the product.
Quick Start Guides
Contains the product specifications and instructions for modifying
system settings.
K2 System Guide
Contains information on servicing and maintaining the K2 product.K2 Service Manuals
Contains installation, configuration, and maintenance procedures for
shared storage options.
K2 SAN Installation and
Service Manual
The cabling guide provides instructions for K2 Storage Area Network
(SAN) cabling and external configuration. The cabling guide provides
instructions for each level of K2 SAN and covers both redundant and
basic (non-redundant) systems. It also provides instructions for
connecting direct-connect external RAID storage to K2 Summit
systems.
K2 Storage Cabling Guide
There is an Instruction Manual for each type of RAID storage device
that can be a part of a K2 SAN. These manuals contain procedures for
configuring and servicing the device.
RAID Instruction Manuals
Contains information on configuring and servicing the Fibre Channel
switch.
Fibre Channel Switch
Installation Manual
02 February 2012 K2 SAN Installation and Service Manual 25
Preface
To Next Page
Loading...
