Contains information on using SiteConfig, Grass Valley’s system
management tool, for network configuration and software deployment.
SiteConfig User Manual
On-line Help Systems
You can find documentation online with products as follows:
Contains information on using K2 AppCenter. In the AppCenter user
interface menu bar select Help, then choose AppCenter Help Topics
from the drop-down menu.
K2 AppCenter Help
Contains information on using NetCentral. From the NetCentral
interface select Help | NetCentral Help Topics.
NetCentral Help
Contains information on using SiteConfig. In the SiteConfig user
interface menu bar select Help, then choose SiteConfig Help Topics
from the drop-down menu.
SiteConfig Help
K2 FCP Connect documentation
The K2 FCP Connect product has its own documentation set, described as follows:
Provides instructions for using GV Connect, which is a Final Cut Pro
plugin, to access and work with K2 assets. GV Connect is part of the
K2 FCP Connect product.
GV Connect User Manual
Provides instructions for using GV Browse, which is a Final Cut Pro
plugin, to access and work with assets on a MediaFrame server in an
Aurora Browse system. GV Connect is part of the K2 FCP Connect
product.
GV Browse User Manual
Provides detailed instructions to install and configure the K2 FCP
Connect product.
K2 FCP Connect
Installation Manual
Contains the latest information about the K2 FCP Connect product,
including software upgrade instructions, software specifications and
requirements, feature changes from the previous releases, and any
known problems. You should always check the Grass Valley Website
to determine if there is an updated version of release notes available.
K2 FCP Connect Release
Notes
NetCentral documentation
The NetCentral product has its own documentation set, described as follows:
Provides an overview of the installation process to quickly set up and
run NetCentral.
NetCentral Quick Start
Guide
Identifies requirements and procedures to correctly set up servers and
devices, as well as provides detailed instructions to install and configure
NetCentral software.
NetCentral Installation
Guide
Describes how to use the NetCentral Manager to monitor devices.NetCentral User Guide
26 K2 SAN Installation and Service Manual 02 February 2012
Preface
To Next Page
Loading...
