13 / 80
33028_mc_28_Teil2_jh
Symbols explication
Always pay attention to the information indicated by this warning
sign. Pay particular attention to information additionally marked
CAUTION or WARNING. The signal word WARNING indi-
cates the potential for serious injury The signal word
CAUTION
indicates possibility of lighter injuries.
The signal word
Note indicates potential malfunctions.
Attention indicates potential damages to objects.
Menus description
The menus described are in the same order as they appear in the
lower display. To switch to the multifunction menu tap on the SET
button in the base display.
Each chapter of the manual is marked with a model type symbol.
These symbols are exactly the same as the ones used in the trans-
mitter. The symbols indicate the relevant paragraph for your model
type. These symbols help find the paragraph required for the model
programming.
Meaning of the warnings
Transmitter input voltage too low
"Bind?"
No receiver is bound to the active model memory. Shortly tap the
SET button to assign the related option.
The receiver of the active model is switched on while a model
change from the “
Model select” menu is attempted.
No bound receiver in range.
Should the RF transmission be switched "ON" or "OFF"?
Appears only after switching the transmitter on with an already
bound receiver in active model memory.
Request to switch the RF transmission off
To Next Page
Loading...
Need help?
General
Weight and Dimensions
