GRAUPNER MC-28 Programming Manual

38 / 80
33028_mc_28_Teil2_jh
Announce
Here you can select an announce for each phase. The announce can
be selected from the supplied voice pack or from a user voice pack.
Switching to the corresponding phase reproduces the announce.
Phase assignation
In this menu, you can assign a switch or switch combination to the
phases.
Priorities
If no phase switches have been assigned you are in phase "1". When
you start programming phases, this phase must be designed with
the phase name "Normal" in the "Phase settings" menu (described
above). The phase switch "A" has priority over all subsequent switch
positions "B" to "F". The phase switch "B" has priority over all subse-
quent switch positions "C" to "F", etc.
Assigning the switch
• Use the selection keys to select the desired position, then press
the SET button
• Move the desired switch
Assigning the phase and the switch position
• Use the selection keys to highlight the field at the bottom right
and tap the SET button
• Move the desired switch or switch combination
• Select the desired phase name
Phase trim
In this menu, enter the phase-dependent trim settings for the wing
controls. The available flaps that appear depend on the setting in the
"Model type" menu. (ELE, AILE, AILE2, FLAP, FLAP2)
Setting the trim values:
• Select the desired phase
• Select the desired control surfaces (additional control surfaces
on the right are available if a triangle is shown at the bottom left)
• Tap on the SET button, input the trim value
The values of these four columns are identical to those of the line
"FLAP Pos" (flap position) in the "Multi-flap menu" of the "Wing
mixer" menu. Changes always act directly on the other side of the
other menus.
Pha1
Pha2
Pha3
Announce
Pha4
Pha5

–
–
normal
Start
Strecke
–
–
Phase settings
Phase trim
Announce
Timers (general)
Non-delayed chan
Phase assignment
Phase assignment
prior
A B
C D E F
1 Normal
combi
Phase assignment
A B
C D E F
1 Normal
2
6
5
prior
combi
Phase assignment
A B
C D E F
2
6
5
2 Start
prior
combi
Phase settings
Phase assignment
Announce
Timers (general)
Non-delayed chan
Phase trim
Normal

0%
ELEV
Start
0%
AI
Start
Thermal
Tr a c k
0%
0%
0%
0%
0%
0%

GRAUPNER MC-28 Specifications

General

Proper use	Helicopter
Product type	Remote control
Product color	Black, Silver
Frequency band	2.4 - 2.484 GHz
Menu languages	DEU, DUT, ENG, ESP, FRE, ITA
Channels quantity	16 channels
Brand compatibility	Graupner
Throttle (TH) function	Yes
Compatible memory cards	MicroSD (TransFlash)
Number of memory records	120
Maximum operating distance	3000 m
Operating temperature (T-T)	-15 - 55 °C
Power consumption (charging)	400 mA
Operating voltage (max)	4.35 V
Operating voltage (min)	3.4 V

Weight and Dimensions

Depth	235 mm
Width	228 mm
Height	66 mm
Weight	1250 g