GRAUPNER MC-28 Programming Manual

41 / 80
33028_mc_28_Teil2_jh
Reset to the initial value by simultaneously tapping the t u
or  buttons of the right touch-pad.
Frame
This timer is started by an assigned switch. To stop the timer, switch
the assigned switch to the "Off" position and press the ESC key. Reset
to the initial value by simultaneously tapping the
t u or  but-
tons of the right touch-pad.
Phase timer
In this menu you can set the timers assigned in the "Phase setting"
menu.
Timer 1 - 3
The timers are started and stopped via a switch or control switch.
Assign the switch in the column "
".
If a value is not entered in the left column "SEL", the timer counts
up. If a value is set, the timer counts backward from this value.
In the right "SEL" column, you can specify a time at which an audible
alarm is emitted.
Lap time/Time tab
Assign a switch or control switch here to stop the lap timer. The lap
time is then taken in the time table. The basic display shows the lap
counter and the lap time.
The lap counter timer can only be stopped by tapping the ESC key.
Lap display
Assign a switch or control switch here to display the time table in the
basic display.
Non-delayed chan
Timers (general)
Wing mixers
Free mixers
MIX active/phase
Phase timers
Timer1
Timer2
Timer3
Lap time/Tim teb
SEL
–––
0:00
0:00
0:00
Lap display
0s
0s
0s
–––
–––
–––
–––
SEL
GRAUBELE
#01
2:22h
T
P
«Speed »
K78
0:00.0
0:00.0
5.5V
3.9V
0:00.0
M
Lap
2:33.4
11
01
02
03
04
SEL
01:23.4
02:34.5
03:45.6
05
SEL
04:56.7
05:67.8
07
08
09
10
00:00.0
00:00.0
00:00.0
11
12
00:00.0
00:00.0
00:00.0
06
06:78.9

GRAUPNER MC-28 Specifications

General

Proper use	Helicopter
Product type	Remote control
Product color	Black, Silver
Frequency band	2.4 - 2.484 GHz
Menu languages	DEU, DUT, ENG, ESP, FRE, ITA
Channels quantity	16 channels
Brand compatibility	Graupner
Throttle (TH) function	Yes
Compatible memory cards	MicroSD (TransFlash)
Number of memory records	120
Maximum operating distance	3000 m
Operating temperature (T-T)	-15 - 55 °C
Power consumption (charging)	400 mA
Operating voltage (max)	4.35 V
Operating voltage (min)	3.4 V

Weight and Dimensions

Depth	235 mm
Width	228 mm
Height	66 mm
Weight	1250 g