Name: GRAUPNER MC-28
Brand: GRAUPNER
Rating: 4 (1 reviews)

To Next Page

To Previous Page

52 / 80

33028_mc_28_Teil2_jh

AIL -> RUD (aileron -> rudder)

In this mixer, the aileron is entrained by the aileron control. In con-

junction with the differentiation of the ailerons, the negative torque

is compensated. This allows a "clean" curve flight. The rudder

remains separately controllable.

The adjustment is only symmetrical to the neutral point of the aile-

ron control stick. The setting range of ±150 % makes it possible to

appropriately adapt the deflection, independent from the direction

of the rudder servos. This mixer can be activated through a switch or

control switch if the model is to be controlled only through the aile-

rons. Assign a switch in the right column.

FLAP -> ELE (flaps -> elevator)

This mixer causes an elevator correction when the flaps are used.

The flaps can influence the flight speed or compensate for the flap

torques.

The position of the elevator is automatically adjusted through this

mixer as a function of the set value of the set flaps. The setting can

be symmetrical or asymmetrical to the neutral point of the flap con-

trol.

This mixer can be optionally activated through a switch or control

switch. Therefore assign a switch in the right column.

Brake settings

Wing mixers

FL EL 0%0%

–––

Multi-flap menu

Normal

Brake settings

Wing mixers

FL EL 0%0%

–––

Multi-flap menu

Normal

Other manuals for GRAUPNER MC-28

Questions and Answers:

Need help?

Do you have a question about the GRAUPNER MC-28 and is the answer not in the manual?

General