46 / 80
33028_mc_28_Teil2_jh
The options available in the Wing mix menu and its submenus
depend on the number of ailerons and flaps servos specified in the
"Model type" menu. Only the necessary setting options are avail-
able.
With this setting, all options for the pair of ailerons are displayed.
The options of the pair of flaps are displayed a “step” to the right.
Move to the right to switch to the “FLAP2” column.
Model type: "2AIL 4FLAP"
If the servos are connected to the receiver as described in the sec-
tion "Receiver assignment" and if you have selected in the "Model
type" menu, the abbreviations "AILE", "FLAP" and "FLAP2" refer to
the following flaps.
With this setting, all options for the pair of ailerons are displayed.
The options of the pair of flaps are displayed a “step” to the right.
Move to the right to switch to the “FLAP2” column.
Model type: "4AIL 2FLAP"
If the servos are connected to the receiver as described in the sec-
tion "Receiver assignment" and if you have selected in the "Model
type" menu, the abbreviations "AILE", "AILE2" and "FLAP" refer to
the following flaps.
With this setting, all options for the pair of ailerons are displayed.
The options of the pair of flaps are displayed a “step” to the right.
Move to the right to switch to the “FLAP” column.
FL
0%
0%
AI Pos.
EL FL 0%0%
0%
AI
Normal
Diff.
0%
AI-Tr.
AI
+100%
+100%
EL FL Off.
0%
–––
AI
left
FL
left
FL2
left
FL2
right
FL
right
AI
right
FL
0%
+100%
FL Pos.
EL FL 0%0%
+100%
FL2
Normal
Diff.
0%
AI Tr.
AI
0%
0%
EL FL Off.
0%
–––
AI
left
AI2
left
FL
left
FL
right
AI2
right
AI
right