GRAUPNER MC-28 Programming Manual

17 / 80
33028_mc_28_Teil2_jh
Copy phase
Select the "Copy phase" point and confirm with the SET button.
You can always interrupt the process with the ESC button.
• Select the phase to copy and confirm the selection with the SET
button.
• Select the target phase and confirm the selection with the SET
button.
A safety question will appear. If you select YES and press the SET but-
ton, the copy process will be performed. If you select NO, the copy
process will be interrupted.
Permanently save changes / undo changes
The last state of the programming of the model is saved in the model
memory if you perform a model change or if you switch the trans-
mitter off. The change will be manually edited during the use with
the “Permanently save changes / undo changes” function.
You can immediately and permanently save the edited programming
in the model memory with the “Permanently save changes / undo
changes” menu point.
You can undo programming changes implemented during use with
the “Permanently save changes / undo changes” menu point. This
menu point can restore the last performed programming. You can
choose when the undo action should start, either the last switch-off
or the last manual saving.
A safety question will appear. If you select YES and press the SET but-
ton, the related process will be performed. If you select NO the pro-
cess will be interrupted.
7
Copy to phase:
3
5
=>
=>
2
4
6
1
Copy phase
Erase model
Copy model–>model
=>
=>
=>
Export to SD
Import from SD
=>
=>
=>
=>
7
Copy from phase:
3
5
=>
=>
2
4
6
1
Copy phase
=>
=>
=>
Export to SD
Import from SD
=>
=>
=>
=>
Store changes
undo changes
Copy phase
=>
=>
=>
Export to SD
Import from SD
=>
=>
=>
=>
Store changes
undo changes

GRAUPNER MC-28 Specifications

General

Proper use	Helicopter
Product type	Remote control
Product color	Black, Silver
Frequency band	2.4 - 2.484 GHz
Menu languages	DEU, DUT, ENG, ESP, FRE, ITA
Channels quantity	16 channels
Brand compatibility	Graupner
Throttle (TH) function	Yes
Compatible memory cards	MicroSD (TransFlash)
Number of memory records	120
Maximum operating distance	3000 m
Operating temperature (T-T)	-15 - 55 °C
Power consumption (charging)	400 mA
Operating voltage (max)	4.35 V
Operating voltage (min)	3.4 V

Weight and Dimensions

Depth	235 mm
Width	228 mm
Height	66 mm
Weight	1250 g