Name: GRAUPNER MC-28
Brand: GRAUPNER
Rating: 4 (1 reviews)

To Next Page

To Previous Page

30 / 80

33028_mc_28_Teil2_jh

"Type"

In this column you can select the control setting for this channel to

act globally "G" or according to the phase "PH". If the control is

assigned specifically to the phase, the related phase must be active.

The phase name will be shown in the second line from the bottom

of the display.

"fr"

Here you can assign the desired proportional control. “fr” (free) will

be displayed if no control is assigned. Here you can assign propor-

tional controls only, no switch. Assign a control by pushing the SET

button. The abbreviation of the selected control will appear.

"SEL "

Here you can assign the desired switch. If a proportional control is

already assigned, the proportional control will be deactivated and a

second switch in the column can be assaigned. Tap again on SET, you

can also assign logical switches or normal switches.

Assign a switch by pushing the SET button. The abbreviation of the

selected switch will appear.

Delete proportional control or switch:

• Use the SET button to select the desired field

• Tap on the selection buttons

t u or  at the same time

"Offset"

Here, move the center of the channel in a possible range from -125%

to + 125%.

Symmetrical travel setting:

Move the related control element (control stick, proportional con-

trol or switch) into a position in which both sides of the travel adjust-

ment are surrounded by the marking frame. Set with the SET button

and the selection buttons.

Asymmetrical travel setting:

Move the related control element (control stick, proportional con-

trol or switch) into a position in which the single side of the travel

adjustment is surrounded by the marking frame. Set with the SET

button and the selection buttons.

In5

offset

–––

In6

In7

In8

–––

typ

Normal

SEL

In5

offset

–––

In6

In7

In8

–––

typ

Normal

SEL

Move desired

control adj.

In5

offset

–––

typ

Normal

SD2

SEL

Move desired switch

to ON position

(ext. switch: SET)

In5

offset

–––

In6

In7

In8

–––

typ

Normal

Other manuals for GRAUPNER MC-28

Manual40 pages

User Manual36 pages

Questions and Answers:

Need help?

Do you have a question about the GRAUPNER MC-28 and is the answer not in the manual?

GRAUPNER MC-28 Specifications

General

Proper use	Helicopter
Product type	Remote control
Product color	Black, Silver
Frequency band	2.4 - 2.484 GHz
Menu languages	DEU, DUT, ENG, ESP, FRE, ITA
Channels quantity	16 channels
Brand compatibility	Graupner
Throttle (TH) function	Yes
Compatible memory cards	MicroSD (TransFlash)
Number of memory records	120
Maximum operating distance	3000 m
Operating temperature (T-T)	-15 - 55 °C
Power consumption (charging)	400 mA
Operating voltage (max)	4.35 V
Operating voltage (min)	3.4 V