5.5.5 Checking and Service of
Reverse Mechanism
1. Check the mobility of gear shift handle. If it is
not working properly, remove the gear shift
Mechanism to check if the fork, ball and spring is
stuck, in which case replace the defective
component and try again. The last way is to turn to
the professional repairman.
2. If there is lack in the gear shift mechanism,
adjust the nut of the fork to correct position and
strengthen gear shift mechanism.
3. Remove the gear shift mechanism and check
whether the linking rod is cracked; If so, it should
be changed.
4. Check whether the bouncing spring of gear shift
mechanism is intense enough.
5. Check whether the gear is engaged correctly
and whether there is trip stop or lack. If this
situation exists, call for the maintenance staff to
test and repair it.
6. If the gear cannot be engaged, we can test it
from the following aspects:
·Whether the clutch can completely declutch;
·Whether the gearshift is well greased (whether
the oil pipe of gear shift mechanism is blocked);
· Whether gear shift mechanism jams; If this
situation happens, maintenance staff would come
to test and repair it.
To Next Page
Loading...
