GreenWorks CU800 - Operation before Leaving the EV

GENERAL INFORMATION CU800 Service Manual
32
8. Slowly press down the accelerator
pedal, EV can increase speed,
press the pedal to the end, you
can achieve maximum speed.
9. Release the accelerator pedal and
press down the brake pedal, you
can make EV to stop moving.
1.12.2 Operation Before Leaving The EV
1. Press parking pedal until it locks and holds
vehicle.
① Parking Pedal
② Brake Pedal
③ Accelerate Pedal
3. Place F/N/R switch in N position.
① Forward
② Neutral
③ Reverse
4. Press the parking pedal.