GreenWorks CU800 - Adjusting the Headlight Beam; Changing the Headlight Bulb

MAINTENANCE AND ADJUSTMENT OF EV CU800 Service Manual
86
3.3.3 Adjusting the Headlight Beam
1. Adjust:
• headlight beam (vertically)
• turn the adjuster ① in or out.
3.3.4 Changing the Headlight Bulb
Remove:
• Lift the hood up.
• headlight bulb holder cover ②
• headlight bulb holder (with bulb) ③
• bulb
NOTE
Remove the defective bulb by unhooking the headlight bulb holder tabs ④.
WARNING
Keep flammable products and your hands away from the bulb while it is on, since it will be hot.
Do not touch the bulb until it cools down.
2. Install:
• bulb new
Secure the new bulb with the headlight bulb
holder.
Turning in
Headlight beam raised.
Turning out
Headlight beam lowered.