MAINTENANCE AND ADJUSTMENT OF EV CU800 Service Manual
- 64 -
CHAPTER 3 MAINTENANCE AND ADJUSTMENT OF THE EV
NOTE:
The correct maintenance and adjustment are necessary to ensure vehicle and normal driving
The repair personnel should be familiar with the contents of this article.
3.1 MAINTENANCE SCHEDULE
· Check operation/ fluid leakage.
· Correct if necessary.
· Check operation.
· Adjust if necessary.
·Check balance/damage.
· Repair if necessary.
Front and rear
suspension*
· Check operation.
·Correct if necessary.
· Check bearing assemblies for
looseness /damage.
·Replace if necessary.
·Check operation./Replace if damaged
·check toe-in./Adjust if necessary.
Drive shaft universal
joint*
· Lubricate with lithium–soap–based
grease.
· Check operation.
· Replace if damaged.
· Check all chassis fittings and
fasteners.
·Correct if necessary.
Transmission
breather system*
· Check breather hose for cracks of
damage.
·Replace if necessary.
· Check oil level /oil leakage.
· Replace if necessary
· Check operation.
· Adjust headlight beams.