GENERAL INFORMATION CU800 Service Manual
45
1.18 TROUBLESHOOTING
Diagnose electrical and mechanical problems by following an orderly procedure and
remembering the basic operating requirements.
By following a systematic approach, the possibility of unnecessary parts replacement can be avoid,
always start with the simple and most obvious checks when troubleshooting, This would include the Fuse,
Error code and Various electrical switches, fuel vale position and spark plug cap tightness
Proper maintenance as described in Chapter Three reduces the necessity for troubleshooting. Even
with the best of care, however, the EV may develop problems that require trouble shooting.
If the problem cannot be solved. Stop and evaluate all conditions prior to the problem. If the EV
must be taken to a repair facility, the mechanic will want to know as many details as possible.
For removal, installation and test procedures for some components, refer to the specific chapter.
When applicable, tables at the end of each chapter also provide specifications and service limits.
To Next Page
Loading...
