GreenWorks CU800 - Page 68

SPECIFICATIONS CU800 Service Manual
60
2.6 76.8V SYSTEM ELECTRICAL SPECIFICATIONS
Item
Standard
Limit
Controller parameter3
Working voltage
Voltage range
PWM frequency
Over-voltage protective voltage
low-voltage protective voltage
Pulling motor current limit
overheat protective temperature
low-temperature
protective temperature
76.8 VDC
67.2V-86.4VDC
10KHz
96V
40V
350A
95℃
-30℃
-40℃ to -30℃，80℃ to 90℃
----
Battery parameter
Rated voltage
Rated capacity
Type
76.8v
180 Ah
Lithium iron phosphate battery
----
----
Motor parameter
Rated volt
Rated power
Maximum power
Current rating
Rated speed
Maximum speed
Rated torque
Maximum torque
Rated frequency
Protection class
Duty
51V
7.5KW
15KW
120A
3000rpm
5500rpm
24.5N.m
100N.m
100Hz
IP54
S2 60min
----
Charger parameter
Model
Rated input voltage
Rated frequency
Rated Power
Full load efficiency
Working temperature
Structure
Protection function
100-240 V AC
45-65Hz
1200W
≥93％
-40℃~+85℃
All-closed, have fan, natural air cooling
Input Over-voltage Protection, Input
Under-voltage Protection, Output Over-
voltage Protection, Output Under-voltage
Protection, Output Over-current
Protection, Over-temperature Protection,
Short-circuit Protection,
Battery reverse connection protection,
Can communication protection,