MAINTENANCE AND ADJUSTMENT OF EV CU800 Service Manual
- 77 -
1. Measure:
• Tire pressure (cold tire pressure) Out of specification
Adjust.
NOTE
• The tire pressure gauge ① is included as
standard equipment.
• If dust or the like is stuck to this gauge, it
will not provide the correct readings.
Therefore, take two measurements of the
tire’s pressure and use the second reading.
WARNING
Uneven or improper tire pressure may adversely affect the handling of this vehicle and may
cause loss of control.
• Maintain proper tire pressures.
• Set tire pressures when the tires are cold.
• Tire pressures must be equal in both front
tires and equal in both rear tires.
2. Check:
• tire surfaces
Wear/damage○
a
Replace.
WARNING
It is dangerous to drive with a worn-out tire.
When tire wear is out of specification,
replace the tire immediately.