Operating conditions
Normal operating conditions are assumed, which correspond to the parame-
ters defined by Güdel when designing the product. If they are rougher than
assumed, products may fail earlier. Adjust the maintenance intervals to your
operating conditions if necessary.
With prudent operation you can protect your product. Observe the permissi-
ble performance limits of the product.
Avoid, in particular:
• Operation near or above the permissible performance limits
• High acceleration and resulting vibrations and operating forces
• Abrasive and/or corrosive environmental conditions
• Long duty cycles
• Always the same axis positions under high load
Exclusion of gaskets and bearings
The maintenance interval specifications apply without gaskets and bearing.
Gaskets are subject to special wear and are not considered. In the case of
gearboxes, the bearings are also excluded.
Maintenance OPERATING MANUAL FlexxPump4N Lubrication System
3422906891_v1.0_EN-US
102
To Next Page
Loading...