GUDEL FlexxPump4 N - Transport Recommendations; Installation Steps

5.3 Transport
Avoid strong impacts and shocks while transporting the lubrication system.
5.4 Installing
5.4.1 Prerequisites
Dispose of the packaging in accordance with the local waste regulations.
Ü2139
Checking the deliv-
ery
Check the content of the delivery by comparing it with the accompanying
documents. Check the product for damage. Report transport damage
promptly.
Interfaces
Check whether the necessary interfaces are present and ready for use.
The following interfaces are needed:
• Lubricating pinion (lubricate rack and pinion)
• Lubcricating element (lubricate rails)
• 4-pin M12x1 connecting cable in the suitable length
(order information on connecting cable ÜChapter11,2143)
• PLC, if present
Commissioning
OPERATING MANUAL FlexxPump4N Lubrication
System
3422906891_v1.0_EN-US
43