GUDEL FlexxPump4 N - Fig. 9 -2 Pre-Lubricating Rails and Racks; Tab. 9-2 Lubricant: Rails, Racks, and Pinions

9.4.1.2 Pre-lubricating rails and racks
ü
û
Fig.9-2 Pre-lubricating rails and racks
Lubrication ex works Specifications Lubricant quan-
tity
ÜChapter7.2.2.1, 298 ÜChapter7.2.2.1,
298
Tab.9-2 Lubricant: Rails, racks, and pinions
Pre-lubricate the rails and racks as follows:
Prerequisite: The rails and racks have been cleaned.
1 Switch off the system and secure it with a padlock against being switched
on again
2 Pre-lubricate rails and racks according to illustration
The rails and racks have been pre-lubricated.
Decommissioning, storage
OPERATING MANUAL FlexxPump4N Lubrication
System
3422906891_v1.0_EN-US
137