GW Instek PEL-3000 Series - Recalling Files from USB Memory

OPERATION
105
Memory:
Setup Memory:
Preset:
M001 - M256
1 - 100
P0 - P9
5. Press Recall[F4] to recall.
 For Memory Data and Preset Data, a popup
window will appear. Press the
Enter
key to
confirm the recall.
Note
Normal Sequence and Fast Sequence data cannot be
recalled from or saved to an internal memory slot.
They can, however, be recalled directly from USB
memory. See the next section below for details.
Recalling Files from USB Memory
Description
When recalling Memory, Setup or Preset files from
USB memory, a single file from the USB drive will
overwrite all the existing memory slots for the
selected data type.
For Normal or Fast Sequence files, the recalled file
becomes the active setting as these types of files
don’t have an internal memory slot.
Caution
You can only recall files from the same model.
Memory Data
Example
Media | USBMedia | Memory
Recall file
M001
:
:
M256
MXXX
For example, if the file 3021(H)_01.M is recalled, all
the Memory Data from M001 to M256 will be
overwritten.