GW Instek PEL-3000 Series - PEL-3000(H) Default Settings

APPENDIX
211
Replace the Clock Battery
Background
The system clock keeps time using a user-
replaceable battery.
The battery should be replaced approximately
every 3 years.
Battery type:
CR123A
Procedure
1. Turn off the PEL-3000(H) and remove the case.
 First remove the handle by carefully removing
the plastic tabs and then unscrewing the two
screws connecting the handle to the case.
 A total of 10 screws should be removed from
the case.
2. Remove the battery and replace with the same
type and rating.
 The battery is located on the right hand side,
near the rear panel.
CR123A