GW Instek PEL-3000 Series - Go-NoGo

OPERATION
93
Control Settings
Description
The Knob Type setting determines if values are
updated immediately as they are edited or if they
are only updated after the Enter key is pressed.
The Updated setting is applicable for when the load
is already on and the user wishes to change the set
values (current, voltage, etc.) in realtime.
The Old setting will only update the values after
the Enter key is pressed.
Operation
1. Press
Shift
+
Utility
Help
> Other[F5].
2. Set the Knob type and Slave knob settings.
Range:
Knob type: Updated, Old
Language Settings
Description
The PEL-3000(H) supports only English.
Operation
1. Press
Shift
+
Utility
Help
> Other[F5].
2. Set the Language setting.
Supported languages:
English
Input/Output Trigger Settings
Trigger In Delay
Description
The Trig In Delay setting determines how long to
delay any action after a trigger is received.