GW Instek PEL-3000 Series - Protection Settings

PEL-3000(H) User Manual
80
Step Mode Configuration
Description
When set to Step Mode, the voltage, current,
resistance and power settings can have the step
resolution configured. The step resolution refers to
the step resolution of the coarse adjustment for
these settings. The fine adjustment cannot be
configured.
See the Conventions section on page 45 for details
on how to switch between coarse and fine
adjustment modes.
Settings
The step resolution of each setting is configured
separately for each current range.
Settings
Description
CCH Step
CC mode, IRange = High
CCM Step
CC mode, IRange = Middle
CCL Step
CC mode, IRange = Low
CRH Step
CR mode, IRange = High
CRM Step
CR mode, IRange = Middle
CRL Step
CR mode, IRange = Low
CVH Step
CV mode, VRange = High
CVL Step
CV mode, VRange = Low
CPH Step
CP mode, IRange = High
CPM Step
CP mode, IRange = Middle
CPL Step
CP mode, IRange = Low