GW Instek PEL-3000 Series - Recall Memory Safety Setting; File Utility

OPERATION
107
File Utilities
7. Press File Utility[F5] to access the file utility. See
page 107 for details.
 Change the USB path.
 Rename files or create directories.
Caution
If “Machine Type Error” is displayed it indicates that
the file that you are trying to recall originated from a
different model. You can only recall files from the
same model.
Recall Memory Safety Setting
Description
By default when you try to recall preset settings
from internal memory, a message will appear
asking you to press the Enter key to confirm. This
is the standard safety measure to ensure that the
wrong setting is not recalled. This safety measure
can be disabled by setting the Mem. Recall setting
to “Direct”.
Operation
1. Press
Main
> Configure[F5] > Other[F2] and
set the Mem. Recall setting.
Range:
Safety, Direct
Note
This setting only applies when recalling preset settings
from internal memory, either by using the Presets keys
(P0 - P9) or by using the File menu. See page 109 and
104.
File Utility
Description
The file utility allows you to create new folders,
rename files and set the USB path directory.
It is only available for use with the USB external
memory.