GW Instek PEL-3000 Series - Select the Display Units for Dynamic Mode Levels

OPERATION
67
Display:
Static Mode
Mode
CP
I Range
H 8.75A
V Range
H 800V
Function
Static
Configure
0.00
V
0.0000
A
0.00
W
CP B Value 0.00
CP A Value 0.00
LOADRS232
A Value
Fine
01/Oct/2018
W
W
Active setting
A Value
B Value
+CV OFF V
Static mode
Display:
Dynamic Mode
Mode
CP
I Range
H 8.75A
V Range
L 80V
Function
Dynamic
Configure
0.000
V
0.0000
A
0.00
W
Timer1 0.025
Level2 0.00
Level1 0.00
LOADRS232
Fine
01/Oct/2018
mS
W
W
Dynamic mode
Level1
Level2
Timer1
Select the Display Units for Dynamic Mode Levels
Description
When Dynamic mode is selected, the Level1 and
Level2 values can be set to either discrete values or
as a percentage of a set value.
 The setting applies to all applicable operation
modes.
 By default the units are set to Value.
 When Percent is chosen, 100% = 100% of the Set
power, current or resistance value.