GW Instek PEL-3000 Series - CR Units

PEL-3000(H) User Manual
56
such as the slew rate, and switching function
settings. See page 65 for details.
Display
Mode
CR
I Range
H 8.75A
V Range
L 80V
Function
Static
Configure
0.000
V
0.0000
A
0.00
W
SlewRate 14.000
CR B Value 0.54422
CR A Value 0.54422
LOADRS232
A Value
Fine
01/Oct/2017
mA/uS
Ω
Ω
Mode
Current range
Voltage
range
Active
setting
Conductance/
Resistance
settings
Note
Basic CR mode configuration is complete. See page 65
for more configuration options.
The current range and voltage range applies to all the
operating modes.
CR Units
Description
The CR setting units can be set to ohm (Ω) or
millisiemens (mS).
Operation
1. Make sure the load is off.
2. Press
Main
> Configure[F5] > Other[F2] and
set the CR Unit setting.
Range:
Ω, mS