GW Instek PEL-3000 Series - J3 Port (PEL-3021 H;PEL-3041 H;PEL-3111 H)

EXTERNAL CONTROL
167
J3 port (PEL-3021H/PEL-3041H/PEL-3111H)
Description
Use wire of 24 to 28 AWG to connect with J3 port.
Please peel the coating of a wire approximately
10mm and then insert the wire to the terminal
hole while pushing the button on the terminal
hole of the J3.
To view the contact pin assignment of the J3,
please see page 219 in the appendix chapter.
WARNING
Please insert the wire to the hole of terminal J3
deeply. A conductor part of the wire, please do not
come in contact with the frame and conductor part of
other wire.
To prevent electric shock, ensure the cover for the J3.
Pin Assignment
J3 Pin assignment
No
Name
No
Name
1
I MON OUT
2
V MON OUT
3
A COM
4
A COM