GW Instek PEL-3000 Series - CV Mode; CP Mode

APPENDIX
237
Accuracy of Setting
*2
H, M Range
±(0.5 % of set
*3
+ 0.5 % of f.s.
*4
) + Vin
*5
/500 kΩ(3.24MΩ)
(±(0.5% of set+ 0.5%fs)+ Vin/3.24MΩ)
L Range
±(0.5 % of set*3 + 0.5 % of f.s.) + Vin*5/500 kΩ(3.24MΩ)
(±(0.5% of set+ 0.5%fs)+ Vin/3.24MΩ)
Parallel
Operation
±(1.2% of set+ 1.1%f.s.
*4
)
*1 Siemens[S] = Input current[A] / Input voltage[V] = 1 / resistance[Ω]
*2 Converted value at the input current. At the sensing point during remote
sensing under the operating range of the input voltage.
*3 set = Vin / Rset
*4 f.s. = Full scale of High Range
*5 Vin = Input terminal voltage of electronic load
CV Mode
Model
PEL-3021(H)
PEL-3041(H)
PEL-3111(H)
Operating Range
H Range
1.5V-150V(5V~800V)
M Range
1.5V-15V(5V~80V)
Setting Range
H Range
0V-157.5V(0V~840V)
M Range
0V-15.75V(0V~84V)
Resolution
H Range
10mV(20mV)
M Range
1mV(2mV)
Accuracy of Setting
*1
H, L Range
±(0.1 % of set + 0.1 % of f.s)/(H) ±(0.2 % of set + 0.2 % of f.s)
Input current variation
*2
H Range
50mV(80mV)
L Range
12mV(80mV)
*1 At the sensing point during remote sensing under the operating range of the
input voltage. It is also applied for the condition of the parallel operation.
*2 With respect to a change in the current of 10 % to 100 % of the rating at an
input voltage of 1.5 V(5V)(during remote sensing).
CP Mode
Model
PEL-3021(H)
PEL-3041(H)
PEL-3111(H)
Operating Range
H Range
17.5W -175W
35W-350W
105W -1050W