GW Instek PEL-3000 Series - First Time Use Instructions; Rack Mount Kits

PEL-3000(H) User Manual
26
First Time Use Instructions
Use the procedures below when first using the PEL-3000(H) to
install the rack mount kit, power up the instrument, set the internal
clock, restore the factory default settings and check the firmware
version. Lastly, the Conventions section will introduce you to the
basic operating conventions used throughout the user manual.
Rack Mount Kits
Description
The PEL-3000(H) has a number of rack mount
options for installation. The GRA-413 rack mounts
are suitable for the PEL-3211(H) booster pack. The
GRA-414 rack mounts are capable of holding 1x
PEL-3111(H) or
2x PEL-3021(H)/3041(H) units.
For installation details, please see the GRA-413
and GRA-414 Rack Mount Assembly Manual.
Please see your distributor for which rack mount
is suitable for your application.
GRA-413
(EIA standard)
128
532
.
5
482
.
6