GW Instek PEL-3000 Series - Save Recall; File Structure

PEL-3000(H) User Manual
98
Save Recall
The PEL-3000(H) can save and recall system settings, preset data,
memory data, Go-NoGo settings as well as normal and fast
sequences to internal memory or to USB.
File Structure
Description
The PEL-3000(H) file system can save files to
internal memory (Media|Memory) and external
memory (Media|USB).
To save or recall Memory, Setup or Preset data, the
PEL-3000(H) uses a three tier system where files
are saved or recalled in the following order:
Active settings <> Internal memory <> USB.
This can be best described in the picture below.
Local Memory
Media | Memory
Media | USB
Memory data
Setup data x1
Nseq. data x1
Fseq. data x1
Preset data x1
Memory data (M001 ~ M256)
Setup data (001 ~ 100)
Preset data (P0 ~ P9)
Memory data (M001 ~ M256)
Setup data (001 ~ 100)
Nseq. data x1
Fseq. data x1
Preset data (P0 ~ P9)
Active Settings
Memory data x1
Example
To load Preset Data P7 from USB, you must first
load Preset Data P0-P9 to internal memory, then
from internal memory load Preset P7 to be the