GW Instek PEL-3000 Series - GPIB Function Check

REMOTE CONTROL
203
GPIB Function Check
Functionality
check
Please use the National Instruments Measurement
& Automation Controller software to confirm
GPIB functionality.
See the National Instrument website,
http://www.ni.com for details.
Note
For further details, please see the programming
manual, available on the GW Instek web site @
www.gwinstek.com.
Operation
1. Start the NI Measurement and
Automation Explorer (MAX)
program. Using Windows, press:
Start>All Programs>National
Instruments>Measurement & Automation
2. From the Configuration panel access;
My System>Devices and Interfaces>GPIB0
3. Press the Scan for Instruments button.