GW Instek PEL-3000 Series - Page 136

PEL-3000(H) User Manual
134
 The Normal Sequence function can also be
turned on from the FUNC menu. See page 112
for details.
3. Turn the load on by pressing
Shift Load
On/
Off
.
 The
Load
On/
Off
key will turn orange when the
load is “on”.
 The load can be turned off again by pressing
the
Load
On/
Off
key.
 The normal sequence/chain starts immediately.
 The
NSEQ
icon turns orange when the load is
turned on.
4. When a normal sequence/chain is running, the
screen displays which sequence, step and loop
are currently active. It also displays the elapsed
or remaining test time and elapsed/remaining
time of the current step.
 Sequences can be paused by pressing Pause
[F1] and resumed again by pressing Continue
[F1].
 If no steps have been created “No N.Seq.” will
be displayed on the screen.
 “Sequence Complete” will be displayed at the end
of the sequence.