67
Item S5130S-28F-EI S5130S-52F-EI
Power module slot 2, at the rear panel 2, at the rear panel
Input voltage
PSR75-12A:
• Rated voltage:
100 VAC to 240 VAC @ 50 or 60 Hz
240 VDC
• Max voltage:
90 VAC to 290 VAC @ 47 to 63 Hz
180 to 320 VDC
PSR150-A1:
• Rated voltage: 100 VAC to 240 VAC @ 50 or 60 Hz
• Max voltage: 90 VAC to 264 VAC @ 47 to 63 Hz
PSR150-D1:
• Rated voltage: –48 VDC to –60 VDC
• Max voltage: –36 VDC to –72 VDC
DC power source for the PSR150-D1 power module: –48 VDC power source in
the equipment room or an RPS (H3C RPS800-A or RPS1600-A)
Minimum power
consumption
• 1 × PSR75-12A: 15 W
• 2 × PSR75-12A: 17 W
• 1 × PSR150-A1: 18 W
• 1 × PSR150-D1: 18 W
• 2 × PSR150-A1: 23 W
• 2 × PSR150-D1: 22 W
• 1 × PSR75-12A: 26 W
• 2 × PSR75-12A: 29 W
• 1 × PSR150-A1: 27 W
• 1 × PSR150-D1: 27 W
• 2 × PSR150-A1: 32 W
• 2 × PSR150-D1: 33 W
Maximum power
consumption
• 1 × PSR75-12A: 45 W
• 2 × PSR75-12A: 48 W
• 1 × PSR150-A1: 48 W
• 1 × PSR150-D1: 51 W
• 2 × PSR150-A1: 55 W
• 2 × PSR150-D1: 57 W
• 1 × PSR75-12A: 69 W
• 2 × PSR75-12A: 72 W
• 1 × PSR150-A1: 74 W
• 1 × PSR150-D1: 84 W
• 2 × PSR150-A1: 95 W
• 2 × PSR150-D1: 95 W
Chassis leakage current
compliance
UL 60950-1/EN 60950-1/IEC 60950-1/GB 4943
Melting current of power
module fuse
• PSR75-12A: 3.15 A/250 V
• PSR150-A1: 6.3 A/250 V
• PSR150-D1: 8 A/250 V
Cooling system
Using fixed fan trays to draw ambient air in from the left side and port side and
exhaust heated air from the right side.
Operating temperature –5°C to +45°C (23°F to 113°F)
Operating humidity 5% to 95%, noncondensing
Fire resistance
compliance
UL 60950-1/EN 60950-1/IEC 60950-1/GB 4943
Table 14 Technical specifications for non-PoE switch models (5)
Item S5130S-28MP-EI S5130S-52MP-EI
Dimensions (H × W × D)
43.6 × 440 ×160 mm (1.72 × 17.32 ×
6.30 in)
43.6 × 440 × 230 mm (1.72 × 17.32 ×
9.06 in)
Weight ≤ 2.5 kg (5.51 lb) ≤ 3.5 kg (7.72 lb)
To Next Page
Loading...
