Haas Mill User Manual

96-8000 rev R June 2007
Safety
1
HAAS SAFETY PROCEDURES
T HINK SAFETY!
DON’T GET CAUGHT UP
IN YOUR WORK
All milling machines contain hazards from rotating
parts, belts and pulleys, high voltage electricity,
noise, and compressed air. When using CNC
machines and their components, basic safety
precautions must always be followed to reduce the
risk of personal injury and mechanical damage.
Important – This machine to be operated only
by trained personnel in accordance with the
Operator’s manual, safety decals, safety
procedures and instructions for safe machine
operation.
SafSaf
SafSaf
Saf
ety Contentsety Contents
ety Contentsety Contents
ety Contents
USES AND GUIDELINES FOR PROPER MACHINE OPERATION ........................................................................... 4
MODIFICATIONS TO THE MACHINE ....................................................................................................................... 4
SAFETY PLACARDS............................................................................................................................................... 4
MILL WARNING DECALS ........................................................................................................................................ 6
DECLARATION OF WARNINGS, CAUTIONS, AND NOTES ..................................................................................... 6
LATHE WARNING DECALS ..................................................................................................................................... 7

Haas Mill Specifications

General

Travels X Axis	Varies by model
Travels Y Axis	Varies by model
Travels Z Axis	Varies by model
Spindle Speed	Varies by model
Spindle Motor	Varies by model
Table Size	Varies by model
Rapid Traverse Rates	Varies by model
Tool Capacity	Varies by model
Max Cutting Rate	Varies by model
Spindle Taper	Varies by model