Page 32
Wiring the Instrument
UVTOCUnpacking Installation Setup.fm
Section 2
Figure 10 Locating the Electrical Connections
1. 8001 I/O Termination Printed Circuit Board Assembly 6. User Power Connections
2. RS485 Expansion Ports —not for customer use 7. Analog Output 1 and Analog Output 2
3. Power Supply Cover 8. Location for optional serial communications network card
(Accessories on page 171)
4. Transformer Voltage Selector 9. Mapped Relays (S1–S5)
5. Power Supply Voltage Selector 10. Optional Level Detector Connections
To Next Page
Loading...
