Section 2
Page 43
UVTOCUnpacking Installation Setup.fm Serial Data Connections
Figure 21 Installation Location for the Communication Kit Components on the I/O Assembly PCB
1. 6-pin Connector for J3 2. 10-pin Connector for J1 3. Mounting Holes on the I/O PCB
Assembly for the Standoffs
Table 5 Data Communication Connections
Network Line Number RS232 Connections RS422/485 Connections1
1
Install a jumper from JP1-2 to JP1-3 (lower two pins) on the I/O pcb (130143) for RS422 and RS485 communications
(Figure 11 on page 33, item 5).
Line 1 RD RD–A
Line 2 No connection RD–B
Line 3 TD TD–A
Line 4 No Connection TD–B
Line 5 Signal Common Network Signal Common
Line 6 Shield Shield
To Next Page
Loading...
