Hach HIAC 9705 - Initial Power On

9705 - Initialization 21 of 82
KSS - March 2006 - Edition 1
HIAC Operator Manual
N
o
t
e:
If the paper does not feed out or no image appears on the paper after a print command has
been sent, double-check paper direction.
2.7 Initial Power On
Once the unit is powered on, the screen appears like the one shown in Figure 2-9.
• Refer to “Operating the 9705” on page 55 for more information on operating the unit.
• Refer to “System Setup” on page 23 for information on system configuration.
Fig 2-9 : Main Screen