Hach HIAC 9705 - 3.14.2 Changing the Password; Fig 3-41: Security Settings Screen

9705 - System Setup 53 of 82
KSS - March 2006 - Edition 1
HIAC Operator Manual
2) Touch the Enabled Security checkbox to enforce password protection.
CAUTION:
For system security, immediately change the password from the default.
N
o
t
e:
Once a password has been set, it cannot be deleted. If a password is lost or forgotten, call
Hach Ultra at 800.866.7889 or +1-541.472.6500 for assistance.
3) Press the Return icon to save changes and return to the main screen.
3.14.2 Changing the Password
1) From the Main screen, select the System icon > Security icon to invoke the Security
Settings screen shown in Figure 3-41.
2) Press the Change Password icon to invoke the Change Password screen.
3) Touch the Enter New Password field. A keyboard entry screen appears.
4) Enter the new password from the keyboard entry screen.
5) Press Enter.
6) Touch the Confirm new password field to invoke a keyboard screen. Re-enter the
new password and press Enter to close the keyboard entry screen.
7) Press the Return icon to save changes and return to the main screen.
N
o
t
e:
Once a password has been set, it cannot be deleted. If a password is lost or forgotten, call
Hach Ultra at 800.866.7889 or +1-541.472.6500 for assistance.
Fig 3-41 : Security Settings Screen
• Passwords are case-sensitive and must be at least 1 character and no longer
than 12 characters.
• Asterisks appear in the field to preserve the password’s security.