9705 - Operating the 9705 59 of 82
KSS - March 2006 - Edition 1
HIAC Operator Manual
1) From the main screen, select the Settings icon > Printer icon to invoke the Printer
Settings screen, shown in Figure 4-4.
2) Select Automatically Print Runs by touching the checkbox to mark it.
3) Set the average or standard deviation to print by clicking the boxes.
4) Press Return to return to the Setup screen.
4.6.2 Manually Printing Results
1) From the main screen, select the Print icon.
2) The currently displayed data record prints.
4.7 Operating with PharmSpec
The Model 9705 Liquid Particle Counting System can be used with PharmSpec 2.1 software.
Refer to the PharmSpec Software User Guide (part number 720-100-0063) for additional
information on operating with PharmSpec software.
Fig 4-4 : Print Tab
To Next Page
Loading...
