58 of 82 Operating the 9705 - 9705
KSS - March 2006 - Edition 1
Operator Manual HIAC
9) Load a bottle of deionized water and flush the system by pressing the Flush icon to
ensure no sample remains in the inner tubing before running the next sample.
4.5.1 Adding Notes
From the Main Screen, the Notes tab is also available. To add notes about the sample, such
as information about the location, type, or any identifying information about the sample:
1) Touch the upper-left hand corner of the main screen to invoke the Notes screen, shown
in Figure 4-3.
2) To add notes, touch the Add Notes icon to invoke a keyboard entry screen. Notes are
limited to 24 characters per line.
3) Press Enter to return to the Notes screen.
4) Press the Return icon to return to the main screen and start the run. The note will
appear the next time a run is initiated.
4.5.2 Editing Notes
1) To edit a note, access the Notes screen by tapping the upper left corner of the main
screen.
2) Highlight the note and tap Edit. A keyboard entry screen appears. Notes are limited to
24 characters.
3) Press Enter to finish the entry and return to the Notes tab.
4.6 Printing Results
Results may be printed automatically or manually.
4.6.1 Automatically Printing Results
The 9705 can automatically print results every time a sample run is completed.
Fig 4-3 : Notes Tab
To Next Page
Loading...
